These are monoblock type of pumps which are coupled to a motor, which can be easily mounted and dismounted.This unique feature reduces the shutdown time of the pump for repair or maintenance of the motor .Also only a motor of equal capacity can be kept as standby.

CONSTRUCTION OPTIONS APPLICATION
Body
Stem
Pump housing
Impeller
Shaft
Falnge		 C.I.
C.I.
C.I.
C.I.
EN8
C.I.
Stem Gunmetal/Teflon Coated
Pump Housing Gunmetal/Teflon coated
Impeller GunmetalTeflon Coated
Shaft Stainless Steel/Teflon Coated.
Types of Fluids -Water
  -CoolingEmulsions
  -Cooling/Cutting Oils
Kinematical Viscosity :90 mm2/s
Pumping Temperature : 0-50oC
SPECIAL VERSIONS

Available

  • Available without motor to suit std B5 range motor
  • With Flame Proof Motors to pump hazardous liquids
  • For frequent on/off cycles
  • For any immersion depths
  • For high viscous liquids
  • To handle hot liquids up 100oC
  • With below shown mounting (give A&B dimensions)
 USED ON

All CNC machines to flush chips, to transfer fluid for Filteration, Cyclone Filter, chip Conveyor, EDM Wire cut machines, Heat treatment plants, Grinding machines, Granite and Indoor Fountains.












Type Immersion
Depth		 H1 H2
Max		 A+0
-1		 B
Max		 D
Max		 d
-0.2		 d1
BSp		 F L1
Max		 INLET
BSP		 L3 PUMPING
CAPACITY		 POWER IN
KW/HP		 WT
IN KG
RKC - 100 311 200 420 141 81 156 165 1" 200 126 11/2" 120   0.75/1.0 37.0
RKC - 150 311 200 420 141 81 156 165 1" 200 126 11/2" 120 REFER 1.1/1.5 38.0
RKC - 200 311 200 454 141 81 170 165 1" 200 135 11/2" 120 GRAPH 1.5/2.0 46.0
RKC - 300 311 200 500 181 81 208 215 1 1/2" 250 155 11/2" 125   2.25/3.0 57.0
RKC - 500 311 200 590 181 81 225 215 1 1/2" 250 165 21/2" 125   3.75/5.0 69.0
ALL DIMENSION ARE IN MM, DISCHARGE IN I.P.M AND RPM 2900

Home Page | Conventional | R V Series | Coupled | High Discharged | Multistaged | RKM50 Series |
RKM100 Series | RKM250 Series | RKM200 Series | RKM400 Series | Contact us